Mas Trailer Tanker 2024 Adr aliminum luxury model camión cisterna semirremolque nueva

LUXURY MODEL ADR
ALUMINUM TANKER
DIMENSIONS:
Length: 10850 mm
Width: 2550 mm maximum
Height: 3750 mm
Pin - Ground clearance: 1250 mm

CHASSIS AND STRUCTURE:
Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 6 Compartments
Tank capacity between 30,000 lt & 45,000 lt
5.28mm aluminum alloy sheet
Tanker with ADR

Axles
3 BPW or Saf brand axles are used, each with a load capacity of 12 tons.
Air suspension.
The front axle is lifted and can be controlled from the cab.

BRAKE SYSTEM:
Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed.

ELECTRICAL SYSTEM:
Aspöck lighting system and Aspöck bumper
2x7 pin sockets - 24V, lights according to SAE standards.
Rear lights, side marker lights, brake safety warning lights and signal lights are installed.
2 tail and stop combination lights.
2 turn signal combination lamps are installed.
1 license plate light.
The electrical system complies with European standards and is flame retardant.

PARKING LEGS
OMS brand parking legs
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 T


TIRES AND RIMS:
385/65/R22.5 STARMAX PETLAS, (6 pieces)
11.75 x 22.5, JANTSA rim (6 pcs)


KING-PIN:
Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.


PAINTING:
All parts are carefully cleaned before painting.
First protective primer and epoxy is used for painting.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost.

EMCO WHEATON or CİVACON manhole cover:
It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The center-opening manual lid has a diameter of 250 mm.


EMCO WHEATON or CİVACON pneumatic control unit
It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. There are separate buttons for each eye and a clock indicating the air pressure, and it allows the system to operate during the filling and emptying of the tank.

EMCO WHEATON or CIVACON submersible valve:
3" standard bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out.

EMCO WHEATON or CİVACON-Api valve:
It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made.


ACCESSORIES
6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 Folding ladder
Holder for two 3.5 m drain hoses

Note: Please contact us for your production requests in special sizes.