Mas Trailer Tanker 2024 Carbon steel adr premium model camión cisterna semirremolque nueva

ADR PREMIUM MODEL TANKER

DIMENSIONS:

Length: 10850 mm
Width: 2550 mm maximum
Height 3750 mm
Pin - Ground clearance: 1250 mm

CHASSIS AND STRUCTURE:

Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 5 Compartments
Tank capacity between 30.000 lt & 40.000 lt
4.2mm steel
Tanker with ADR

Axles
3 local axles are used, each with a carrying capacity of 12 tons.
It has air suspension.
The front axle is lifted and can be controlled from the driver's cab.

BRAKE SYSTEM:

Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed.

ELECTRICAL SYSTEM

Saba brand
2x7 pin sockets - 24V, lights according to SAE standards.
Rear tail lights, side marker lights, brake safety warning lights and signal lights are installed.
2 tail and stop combination lights.
2 turn signal combination lamps are installed.
1 license plate light.
The electrical system complies with European standards and is flame retardant.

PARK FEET

OMS brand Park Feet
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 tons
Low gear position : 0.98 mm / RPM


TIRES AND RIMS:

385/65/R22.5 STARMAX PETLAS, ( 6 pcs )
11.75 x 22.5, JANTSA rim (6 pcs)

KING-PIN:

Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.


PAINTING:

All parts are carefully cleaned before painting.
First protective primer and epoxy is used for painting.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost.

KURTUBA manhole cover:

It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. It has standard ports for mounting the vapor recycling valve, level sensor, measuring rod, and vent. The center opening manual lid is 250 mm in diameter.

KURTUBA Pneumatic Control Unit

It is installed in the cabinet of the tank truck. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure and allows the system to operate during filling and emptying of the tank.

KURTUBA submersible valve:

3" standard bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed.

KURTUBA API valve:

It is mounted inside the tanker cabinet, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed.

ACCESSORIES

6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 Folding ladder
Holder for two 3.5 m drain hoses

Note: Please contact us for your production requests in special sizes.