General:
Brand: LETINA
Type: L01
Vehicle Code: C313F4P2 - Pressure food tank, 2.0 Bar

Description: Stainless steel Tank for transportation milk, foodstuff and non-dangerous liquids,
with a capacity of approximately 31,300 Liters
3 compartments (12,000L + 6,300L + 13,000L)
thermally insulated – according ATP regulations
operating pressure 2,0 bar, test pressure 2,6 bar

Technical description:

Tank:
Made of AISI 304 (DIN 1.4301) quality stainless steel material,
with a filling manhole on each compartment,
with stainless steel inner rings
Tank Volume: 31.300 Liters (+/- 2%)
Number of Compartments: 3 (12,000L / 6,300L / 13,000L)

Manholes:
3 x Filling manholes, size DN500
Each manhole cover has 4 wing nuts and 1 safety relief valve +2.0 Bar / - 0.2 Bar

Manhole Spill Box, Square Design:
On the top of the vessels
Stainless steel, insulated
2 hinged lids with lock, insulated

Insulation and Cladding: - According to ATP "IN"
Body Insulation: approx. 50 mm polyurethane
Tank Heads Insulation: 100 mm glass wool
Insulation Cladding: stainless steel mirror polishing
Bottoms Cladding: Fiberglass – RAL 7016

Operation Pressure:
Operating pressure 2,0 bar, test pressure 2,6 bar
CIP system combined with compressed air system

CIP - Central washing system:
On the right side, with 5 independent spray heads (2+1+2) and a shut-off valve for each spray head, stainless steel pipeline DN50 connection on the rear right

Pressurized system: connection for air filter with „T“ connection at front right side, with pressure gauge

Thermometer: 3 x thermometer (-20°C to +150°C), 1 per chamber
Walkway: Aluminium anti-slip walkway along the tank and around manhole catch basins – on the left side
Handrail: Folding handrail in stainless steel, operated through the lower half of the access ladder - on the left side
Ladder: Stainless steel ladder with non-slip steps located at the back of the tank – on the left side
Hose Deflectors: Bar to protect the insulation and cladding of the tank installed on the upper right and left sides of the tank
Ladder for entering the tank: Stainless steel ladder – on the top of the tank

Discharge System
Bottom Valves: 3 x DN100, with handwheel control on the top
Discharge Line: 1 x Stainless steel pipe DN100, insulated with PE, output at the rear side in stainless steel protection box
Discharge Valves: DN100 butterfly outlet valve with cap, manually operated, in outlet box
Rear Box: Stainless steel armature box for protecting the discharge line at the rear of the tank.

Chassis :

Berger Ecotrail, model SATA 10.5 - galvanized
Coupling height: 1150 mm
Tires/rims: Continental / 385/65 R 22,5 / aluminium rims – Alcoa
Welded frame construction made of fine-grained steel S700
Partly zinc coating for tank chassis, upper chord, external web plate, lower chord ahead, front and
rear closure
3 × SAF-axles, ET 120, Integral disc brake 22,5"
1st axle liftable, Wabco, fully automatic; lift only during drive from 16 km/h
(ATTENTION: ground clearance for LTMn/LTMCn approx. 120mm)
Automatic traction equipment, if the truck has activated its ASR and sends information by CAN to
the trailer. (also above 30 km/h)
(Serial equipment of traction equipment to be activated by brake pedal or by switch up to 30 km/h)
Starting assistance (forced lowering / lifting) via lifting axle, electrically controllable via PIN 12 (by
push-button in the truck)
RDKS SCB-CTU (6-wheels with Tire pressure monitoring sensors)
6 × Splash guard mounted at all mud guards
Wabco EBS brake system, E Generation 2S/2M, spring-controlled parking brake with double
release valve, conventional air suspension with rotary slide valve
RTR (Reset-to-Ride) automatic reset of the air suspension (lifting/lowering valve) to driving level
Coupling head standard (air connections red/yellow)
Seat posts, brand „Jost“, with thrust compensation
Stainless steel package:
Fender bracket, socket bracket, light carriers foldable incl. bracket and screw fitting for supporting
device.
Shim with holder (2 pcs.)
Side protection fix mounted, naturally anodized aluminium, standard version - for SATA / SAAG
Sockets on the front wall, 2×7 pins and 1×15 pins (DIN ISO 3731/12098)
Spare wheel holder in winch version in front of the 1st axle right side
Lighting and Accessories:
24 volts lighting system, type Hella, multifunctional rear lighting (including rear fog lamp and
reversing light),
2 clearance lights with rubber arms (LED),
2 clearance lights (LED) on the front wall,
4 pairs of side marker lights (LED)
Rear end standard

WE ARE LOOKING FOR DISTRIBUTION PARTNERS !

Expand your offering with high-quality Letina tankers.

If you are interested in representing our products in countries where we do not yet have a distribution network, please contact us. We are looking for reliable partners for long-term cooperation.

Important note:

The images and videos shown are for illustrative purposes only.

Would you like to learn more?

For a detailed offer, technical specifications, or information about our distribution partners in your region, please contact us directly using the Autoline form.